FIX MY OTF

Is your blade not ejecting or retracting when you activate the trigger button? Is your OTF in limp mode ( the blade just slides in and out ) 

Here is how to fix that! This is the most common issue people have with their OTF.

Step 1. Carefully grab the blade and pull it all the way out until it LOCKS into place, this will reset the spring

Step 2. Push the trigger to see if that worked. If your knife is functioning again then problem solved!

If you did step 1 and 2 and your blade has occasional misfires then try this.

Step 1. Open the small bottle of Super lube we supplied with your knife.

(If you lost the Super lube then you can use gun oil or white lithium grease)

Step 2. Add a couple of drops down the sides of the opening of the knife (apply down the small edges) this is where the friction occurs.

Step 3. Start engaging the blade and working the super lube in.

If all of these steps do not work for you then please click here and send us an email so we can further assist you